Small Diaphragm Matched Condenser Microphone Pair
PCM-8000 MATCH is a set of two condenser microphones with a 16 mm diaphragm, designed for stereophonic miking of acoustic instruments, overall shots for drums, choirs and live performances. The microphones are matched with tolerance within 1dB, and are equipped with 0dB/-10dB gain selector and 100Hz low-cut filter to adapt to all sources and mic preamps (+48V phantom power is required). The kit - contained in a practical plastic case with protective padding, in addition to the two microphones, includes two shock-mounts with screw adapters from 3/8 "to 5/8", distance bar, and two pop-filters. The pressure gradient capsule with cardioid polar pattern is based on a 16mm gold-plated diaphragm. The process of plating with gold vapors deposited on the surface, gives lightness, an excellent electrical capacity and a linear frequency response. The body of the microphone, in lightweight and sturdy metal, contains the JFET preamplifier to maintain a high isolation between input and output stage, and low self-noise.
Buy directly onlineIdeal for Stereo Overhead, Choir, Cymbals, Percussion, Acoustic Instruments, and Piano | |
16mm High-Quality Pressure Gradient Transducer | |
Vapor-Deposited Gold Diaphragm | |
Premium Quality Preamp Circuitry | |
High Sensitivity and Low Self-Noise | |
Cardioid Polar pattern | |
Linear Frequency Response | |
The Kit Includes 2x Matched Microphones, 2x Shock-Mount Mic Holders, 2 Pop-Filters, and 1 Adjustable Stereo Bar |
Element | Pressure Gradient Transducer |
Polar Pattern | Uni-directional (Cardioid) |
Frequency Response | 30Hz-20kHz |
Match Tolerance | Within 1dB (from 100Hz to 10kHz - excluding 1kHz) |
Sensitivity | -38dB+/-2dB (0dB=1V/Pa @ 1kHz) |
Output impedance | 100ohm +/- 30% @ 1kHz |
Self-Noise | 16dB (A-weighted) |
Max. input SPL | 130dB (@ 1 kHz = 1% T.H.D) |
S/N Ratio | 78dB |
Input Attenuation | 0dB/-10dB Selector |
Low frequency attenuation | 100Hz 12dB/Octave |
Power Requirement | +48V Phantom Power |